A both intresting and a challenging project.
The guitar is Hagström Patch2000 from the late 1970:s. It is the first guitar/synthesizer hybrid made by Hagström in collaboration with Ampeg.
The interface between the guitar and the synth is an Ampeg Patch2000 pedal. It’s got three controls, Pitch, glide and 5th.
Populated and mounted on the faceplate. The offboard wiring is a challenge on this thing.
Worth knowing is that synthcubes “full kit” did not include the powersupply.
A gutshot of the Ampeg pedal. It has by now got new electrolytic capacitors and a calibration.
Here’s a picture of both the synth and the ampeg pedal together.
Once I finally got things hooked up together and could try it out it was clear that it is not fully functional.
First thing I did was check was the offboard wiring on the microcon. There’s eleven pots and a few switches and I had got some wires mixed. After sorting that out the synth now seems to work properly.
Second thing was that the guitars electroninc always had the high E string set as active, therefore the Ampeg pedals Gate got blocked. I found nothing wrong with the guitars harware and measuring indicated that U7 (string monitor) was defect. Schematic for the guitar
So the 74LS151 got replaced with a new one and suddenly things started to interact as it supposed to.
Here’s a pic of the guitars circuitboard U7 is located on the low left
Here’s a short video of the tryout, my son Markus is playing the guitar wich is connected both to the synth and as a normal guitar to an amp. This videoclip also appeared in my earlier post Mystery circuit….
So what’s left for now is to check the Pitch pedal on the Ampeg, it does not always work, there’s some problem with the 7 pin DIN cable from time to time. The Microcon will get a new chassie and a calibration.
I just need to find the time for everything.